Ich habe versucht, Fancy Product Designer zusammen mit dem Woodmart Theme zum Laufen zu bekommen und bin auf ein paar kleine Probleme gestoßen.
Ich habe ein Produkt mit FPD gestaltet. Danach ersetzt das Plugin das erste Bild der Produktgalerie durch das individuell gestaltete Produkt - so wie es gemäß meiner Einstellungen auch sein sollte. Dieser Teil funktioniert.
Aber wenn ich nun das angepasste Produkt in den Warenkorb lege und zur Warenkorb- oder Kassenseite gehe, wird wieder das Standardproduktbild angezeigt, nicht mehr das angepasste Bild von FPD.
Nach dem Hinzufügen zum Warenkorb über AJAX wird das Bild noch richtig in der Sidebar angezeigt:
Außerdem sollte auf der Warenkorbseite unter dem Produktnamen ein Link "Hier klicken, um das Produkt erneut zu bearbeiten" angezeigt werden, der zurück zur Produktseite führt, aber auch dieser Link fehlt.
Ich gehe davon aus, dass es ein Problem auf Seiten des Woodmart Themes ist, habe diesbezüglich schon deren Support kontaktiert (nachzulesen hier ). Aber ich hoffe, auch hier Hilfe zu erhalten. Immerhin sind FPD und Woodmart beide wahnsinnig beliebt und es wäre doch für die Kunden von beiden Produkten ein großer Vorteil, wenn das Theme und das Plugin reibungslos miteinander arbeiten würden.
Vielen Dank
Marco
0 Votes
M
Moeen khan posted
8 months ago
Best Answer
If you have the correct settings, then the issue is with a theme for sure. You should wait for Woodmart support they can assist you better with this issue. Thanks
0 Votes
7 Comments
Sorted by
M
Marcoposted
8 months ago
Hello all,
I have been trying to get Fancy Product Designer to work along with the Woodmart theme and have run into a few small issues.
I have designed a product using FPD. After that, the plugin replaces the first image of the product gallery with the custom designed product - as it should be according to my settings. This part works.
I thought so, but I was hoping to find some help here as well from the authors maybe.
0 Votes
M
Moeen khanposted
8 months ago
Answer
If you have the correct settings, then the issue is with a theme for sure. You should wait for Woodmart support they can assist you better with this issue. Thanks
0 Votes
M
Marcoposted
8 months ago
As explained, everything is set up correclty. It works with Storefront theme, just not with Woodmart, so it's an iissue with my theme, overriding the settings of FPD. So it needs a more complex fix than changing settings.
0 Votes
M
Moeen khanposted
8 months ago
Please check if you haven't enabled the recommended settings
- Enable the "Customized Product Thumbnail" options in fpd settings > woocommerce > cart
0 Votes
M
Marcoposted
8 months ago
Sure Moeen, here you go:
Hello all,
I have been trying to get Fancy Product Designer to work along with the Woodmart theme and have run into a few small issues.
I have designed a product using FPD. After that, the plugin replaces the first image of the product gallery with the custom designed product - as it should be according to my settings. This part works.
But now when I add the customized product to the cart and go to the cart or checkout page, the default product image is displayed again, not the customized image from FPD.
After adding to cart via AJAX, the image is still displayed correctly in the sidebar:
Also, on the cart page, there should be a "Click here to re-edit product" link under the product name that takes you back to the product page, but that link is also missing.
I assume that it is a problem on the part of the Woodmart theme, have already contacted their support regarding this (read about it here). But I hope to get some help here as well. After all, FPD and Woodmart are both insanely popular and surely it would be a great benefit to customers of both products if the theme and plugin worked smoothly together.
Thanks a lot
Marco
0 Votes
M
Moeen khanposted
8 months ago
Hello Marco,
Can you please translate the issue into the English language?
Hallo zusammen,
Ich habe versucht, Fancy Product Designer zusammen mit dem Woodmart Theme zum Laufen zu bekommen und bin auf ein paar kleine Probleme gestoßen.
Ich habe ein Produkt mit FPD gestaltet. Danach ersetzt das Plugin das erste Bild der Produktgalerie durch das individuell gestaltete Produkt - so wie es gemäß meiner Einstellungen auch sein sollte. Dieser Teil funktioniert.
Das Originalprodukt sieht so aus:
https://i.imgur.com/JouDdHY.png
Nach der Gestaltung des Produkts:
https://i.imgur.com/EZE52KQ.png
Aber wenn ich nun das angepasste Produkt in den Warenkorb lege und zur Warenkorb- oder Kassenseite gehe, wird wieder das Standardproduktbild angezeigt, nicht mehr das angepasste Bild von FPD.
Nach dem Hinzufügen zum Warenkorb über AJAX wird das Bild noch richtig in der Sidebar angezeigt:
https://i.imgur.com/Ro8mjMo.png
Aber auf der Seite des Warenkorbs wird es nicht mehr angezeigt, stattdessen wird das Standardbild angezeigt:
https://i.imgur.com/5k3Yp8e.png
Kassenseite (das Gleiche):
https://i.imgur.com/v4rbeic.png
Außerdem sollte auf der Warenkorbseite unter dem Produktnamen ein Link "Hier klicken, um das Produkt erneut zu bearbeiten" angezeigt werden, der zurück zur Produktseite führt, aber auch dieser Link fehlt.
Sollte ungefähr so aussehen:
https://i.imgur.com/jffgaPj.png
Fehlt aber leider:
https://i.imgur.com/4KfZtAx.png
Ich gehe davon aus, dass es ein Problem auf Seiten des Woodmart Themes ist, habe diesbezüglich schon deren Support kontaktiert (nachzulesen hier ). Aber ich hoffe, auch hier Hilfe zu erhalten. Immerhin sind FPD und Woodmart beide wahnsinnig beliebt und es wäre doch für die Kunden von beiden Produkten ein großer Vorteil, wenn das Theme und das Plugin reibungslos miteinander arbeiten würden.
Vielen Dank
Marco
0 Votes
Moeen khan posted 8 months ago Best Answer
If you have the correct settings, then the issue is with a theme for sure. You should wait for Woodmart support they can assist you better with this issue. Thanks
0 Votes
7 Comments
Marco posted 8 months ago
Hello all,
I have been trying to get Fancy Product Designer to work along with the Woodmart theme and have run into a few small issues.
I have designed a product using FPD. After that, the plugin replaces the first image of the product gallery with the custom designed product - as it should be according to my settings. This part works.
The original product looks like this:
https://i.imgur.com/JouDdHY.png
After designing the product:
https://i.imgur.com/EZE52KQ.png
const attachment_error_image = (attachment) => { const parentElement = attachment.parentElement; const defaultIcon = `${attachment.dataset.extension}`; parentElement.innerHTML = defaultIcon; };
0 Votes
Marco posted 8 months ago
I thought so, but I was hoping to find some help here as well from the authors maybe.
0 Votes
Moeen khan posted 8 months ago Answer
If you have the correct settings, then the issue is with a theme for sure. You should wait for Woodmart support they can assist you better with this issue. Thanks
0 Votes
Marco posted 8 months ago
As explained, everything is set up correclty. It works with Storefront theme, just not with Woodmart, so it's an iissue with my theme, overriding the settings of FPD. So it needs a more complex fix than changing settings.
0 Votes
Moeen khan posted 8 months ago
Please check if you haven't enabled the recommended settings
- Enable the "Customized Product Thumbnail" options in fpd settings > woocommerce > cart
0 Votes
Marco posted 8 months ago
Sure Moeen, here you go:
Hello all,
I have been trying to get Fancy Product Designer to work along with the Woodmart theme and have run into a few small issues.
I have designed a product using FPD. After that, the plugin replaces the first image of the product gallery with the custom designed product - as it should be according to my settings. This part works.
The original product looks like this:
https://i.imgur.com/JouDdHY.png
After designing the product:
https://i.imgur.com/EZE52KQ.png
But now when I add the customized product to the cart and go to the cart or checkout page, the default product image is displayed again, not the customized image from FPD.
After adding to cart via AJAX, the image is still displayed correctly in the sidebar:
https://i.imgur.com/Ro8mjMo.png
But on the shopping cart page it is no longer displayed, instead the default image is displayed:
https://i.imgur.com/5k3Yp8e.png
Checkout page (the same):
https://i.imgur.com/v4rbeic.png
Also, on the cart page, there should be a "Click here to re-edit product" link under the product name that takes you back to the product page, but that link is also missing.
Should look something like this:
https://i.imgur.com/jffgaPj.png
But is unfortunately missing:
https://i.imgur.com/4KfZtAx.png
I assume that it is a problem on the part of the Woodmart theme, have already contacted their support regarding this (read about it here). But I hope to get some help here as well. After all, FPD and Woodmart are both insanely popular and surely it would be a great benefit to customers of both products if the theme and plugin worked smoothly together.
Thanks a lot
Marco
0 Votes
Moeen khan posted 8 months ago
Hello Marco,
Can you please translate the issue into the English language?
0 Votes
Login or Sign up to post a comment